---
title: TV Settings
description: "## General values - Signal type: **Digital TV** - Type: Cable (**DVB-C**) - Operator: **Ander** (or Telenet) - Frequency: **322Mhz** *or ***322000Khz** - Channel step size: **8Mhz** - Modulation: **256-QAM** - Symbol frequency: **6875Ksym/s** - Network region ID: **22** > ## Before you begin > > > > - Some…"
url: "https://www.smarteye.eu/docs/tv-settings/"
updated: "2023-11-03"
category: Devices
---

# TV Settings

## General values

- Signal type: **Digital TV**
- Type: Cable (**DVB-C**)
- Operator: **Ander** (or Telenet)
- Frequency: **322Mhz** *or ***322000Khz**
- Channel step size: **8Mhz**
- Modulation: **256-QAM**
- Symbol frequency: **6875Ksym/s**
- Network region ID: **22**

> ## Before you begin
>
>
>
> - Some steps on your TV may **differ** from the **steps shown below**
> - **Connect your TV** using a **correct** female-male **COAX cable** (not included) with the **COAX outlet** on the wall having **TV indicated** on it.
> - If your are asked to enter a pincode; but did you forgot? Try one of** the default pincodes**: 0000, 1111 of 1234
> - **Always consult **your personal** TV-equipments manual **for further information on configuration
> - Your TV needs to be equipped with a **DVB-C tuner**

## Examples

### **Example on how to set-up a Phlips TV**

- Press the **Home**-button on your remote control
- Select **Setup** and press **OK** on your remote control
- Select **Search for channels** and press **OK** on your remote control
- Select **Re-install channels **and press **OK** on your remote control
- Select **Belgium** and press **OK** on your remote control
- Select **Cable (DVB-C)** and press **OK** on your remote control
- If possible **Telenet (fast-scan) or Other** as cableprovider
- Select **Settings** and press **OK** on your remote control before you start the installation
- Enter the following **values**…
  - Symbol rate mode: **Automatic**
  - Frequency scan: **Quick scan**
  - Frequency step size: **8MHz**
  - Digital channels: **On**
  - If you see the option Free/Scrambled, choose: **Free + scrambled**

- Press the **green button** on your remote control
- Select **Start** and press **OK** on your remote control: you now begin the **channel installation**
- For **Network frequency** enter the value **322Mhz** (322000Khz) , select **Done** and press **OK** on your remote control
- For **Network ID** enter the code for your region: **22**
- Select Done and press OK on your remote control: **your TV now scans the channels**
  - This is complete when you see this message**: Channel search finished**
  - A **summary** of the results is then shown
  - Select **Finish** and press **OK** on your remote control
- Make sure the option **Automatic Channel Update **is set to **On**This feature enables reception of new or changed channels automatically
  - Press the **Home** button on your remote control
  - Select **Setup **and press **OK **on your remote control
  - First select **Channel settings**, then **Channel installation** and then press **OK** on your remote control
  - Enter the following **values:**
    - Automatic Channel Update: **On**
    - Channel update message: **On**
  - **Close the menu **(by pressing the **Back** button on your remote control one or more times)
  - [http://philips-tvconsumercare.kxondemand.com/portal/en/Faq/All/1681](http://philips-tvconsumercare.kxondemand.com/portal/en/Faq/All/1681)

### **Example on how to set-up a Samsung TV**

- Press the **Menu**-button on your remote control
- Select **Channel** and press **OK** on your remote control.
  *For **Aerial** you must select: **Cable (DVB-C)***
- Go to **Auto tuning** and press  **OK twice** on your remote control
  - Select Aerial: **Cable (DVB-C)**
  - Select Channel Type: **Digital**
  - Select Service Provider: **Other**
  - Select Scan Mode: **Quick**
  - Select Network: **Change Options**
    Press **OK** on your remote control
- **Enter the following values** in **Network**…
  - Selecteer Network: **Manual**
  - Network-ID: **22**
  - For **Frequency** enter the value: **322000** Khzpress **OK** on your remote control
  - Select** Modulation**: **256QAM**press **OK** on your remote control
  - For **Symbolrate** enter the value: **6875** KS/s
    press **OK** on your remote control
  - Select **Close** and press **OK** on your remote control
- Then select **Scan **(or** Next**, this differs per type of TV) and press **OK** on your remote control
- **Your TV now scans the channels**

### **Example on how to set-up a Humax iHDR-5200C Personal Video Recorder**

- Before you start, make sure the device comes with factory settings
- Connect the device and wait until the first screen **1** – **Taal** appears
- Select your **language**
- Select **Next** and press **OK** on your remote control
- **2 – Display** Select the correct settings which match your TV.
  *Whenever in doubt, leave the default settings*
- Select **Next** and press **OK** on your remote control
- **3 – Search Channels** enter the following values…
  - Frequency (Mhz): **322**
  - Network ID: **22**
  - Symbol Rate: **Auto**

- Select **Next** and press **OK** on your remote control: Your device **now scans the channels**
  *The scanning of channels can take up to 5 minutes, If no channels could be found, make sure you are using the correct coax cables and all is connected correctly.*
- Select **Save** to save the channellist into your device
- **4 – Configure Network (optioneel)**
  - Connect your device using a wired LAN cable to one of the free ports of the SmartEye router
- Select **Next** and press **OK** on your remote control: an overview of your IP configuration **DHCP** will be shown
- Select **Next** and press **OK **on your remote control: **5 – Result**
- Select **Next** and press **OK** on your remote control: You now successfully configured your device